MySQL源码安装的方法介绍
发布时间：2022-01-16 19:11:44 所属栏目：MySql教程 来源：互联网
导读：本篇内容主要讲解MySQL源码安装的方法介绍，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习MySQL源码安装的方法介绍吧! MYSQL的安装分三种：命令行安装、二进制安装和源码安装 命令行安装相对而言简单，我们就
|
本篇内容主要讲解“MySQL源码安装的方法介绍”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“MySQL源码安装的方法介绍”吧! MYSQL的安装分三种：命令行安装、二进制安装和源码安装 命令行安装相对而言简单，我们就不做过多陈述，今天就着重讲讲MYSQL的源码安装 编译安装过程描述： 1.下载源代码 2.检查源码编译所需的依赖包是否齐全 3.解压编译 4.make && make install 5.初始化数据目录 6.数据库权限设置 7.定义启动方式 软件安装的常规约定： 软件安装包放在/usr/local/src下 软件根目录basedir在/usr/local/xxx下,如：/usr/local/mysql 配置文件在/etc/下，如：/etc/my.cnf 数据目录datadir一般放在单独的磁盘上 mysql服务名为mysqld ======== 准备 ======== #创建数据目录 [root@xxx ~]# mkdir /data/mysql #创建根目录 [root@xxx ~]# mkdir /usr/local/mysqlrp #进入软件存放目录 [root@xxx ~]# cd /usr/local/src/ [root@xxx src]# mv /root/mysql-5.6.24.tar.gz . [root@xxx src]# tar -zxvf mysql-5.6.24.tar.gz [root@xxx src]# cd mysql-5.6.24 #检查cmake是否安装，如果未安装，请使用yum install cmake或其它方式安装 [root@xxx mysql-5.6.24]# which cmake /usr/bin/cmake #安装必备的依赖包 [root@xxx mysql-5.6.24]# yum install ncurses-devel [root@xxx mysql-5.6.24]# yum install bison #======= 编译 #======= cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysqlrp -DMYSQL_DATADIR=/data/mysql -DSYSCONFDIR=/etc -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DMYSQL_UNIX_ADDR=/tmp/mysql.sock -DMYSQL_TCP_PORT=3306 -DENABLED_LOCAL_INFILE=1 -DWITH_PARTITION_STORAGE_ENGINE=1 -DEXTRA_CHARSETS=all -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci [root@xxx mysql-5.6.24]# ls /usr/local/mysqlrp/ [root@xxx mysql-5.6.24]# [root@xxx mysql-5.6.24]# ls /data/mysql/ [root@xxx mysql-5.6.24]# [root@xxx mysql-5.6.24]# make [root@xxx mysql-5.6.24]# ls /usr/local/mysqlrp/ [root@xxx mysql-5.6.24]# ls /data/mysql/ [root@xxx mysql-5.6.24]# #make install时才会在根目录下生成文件 [root@xxx mysql-5.6.24]# make install [root@xxx mysql-5.6.24]# ls /usr/local/mysqlrp/ bin data include lib mysql-test scripts sql-bench COPYING docs INSTALL-BINARY man README share support-files [root@xxx mysql-5.6.24]# ls /data/mysql/ [root@xxx mysql-5.6.24]# [root@xxx mysql-5.6.24]# cd /usr/local/mysqlrp/ #创建mysql管理用户及组 [root@xxx mysqlrp]# groupadd mysql [root@xxx mysqlrp]# useradd mysql -g mysql #修改配置文件，修改根目录、数据目录位置。 [root@xxx local]# vi /etc/my.cnf ... [mysqld] basedir=/usr/local/mysqlrp datadir=/data/mysql #初始化数据目录 [root@xxx mysqlrp]# ./scripts/mysql_install_db --user=mysql --defaults-file=/etc/my.cnf & #制作mysql服务mysqld [root@xxx mysqlrp]# cp support-files/mysql.server /etc/init.d/mysqld #修改各个目录对应权限 [root@xxx mysqlrp]#chown -R mysql.mysql /usr/local/mysqlrp [root@xxx mysqlrp]#chown -R mysql.mysql /data/mysql [root@xxx mysqlrp]#chown mysql.mysql /etc/my.cnf [root@xxx mysqlrp]#chown mysql.mysql /etc/init.d/mysqld [root@xxx mysqlrp]#chmod -R 755 /usr/local/mysqlrp [root@xxx mysqlrp]#chmod -R 755 /data/mysql root@xxx mysqlrp]#chmod 644 /etc/my.cnf [root@xxx mysqlrp]#chmod 755 /etc/init.d/mysqld #启动mysql服务 [root@xxx local]# service mysqld start Starting MySQL. [ OK ] #======= #源码编译常见依赖包 #======= kernel-headers-2.6.32-358.el6.x86_64.rpm glibc-headers-2.12-1.107.el6.x86_64.rpm glibc-devel-2.12-1.107.el6.x86_64.rpm cpp-4.4.7-3.el6.x86_64.rpm gcc-4.4.7-3.el6.x86_64.rpm libstdc++-devel-4.4.7-3.el6.x86_64.rpm gcc-c++-4.4.7-3.el6.x86_64.rpm autoconf-2.63-5.1.el6.noarch.rpm automake-1.11.1-4.el6.noarch.rpm zlib-1.2.3-29.el6.x86_64.rpm ncurses-devel-5.7-3.20090208.el6.x86_64.rpm libgcrypt-1.4.5-9.el6_2.2.x86_64.rpm libtool-2.2.6-15.5.el6.x86_64.rpm bison-2.4.1-5.el6.x86_64.rpm #======= #附实验2则，解释常见疑问 #实验1说明，数据目录初始化的时候，必须在根目录basedir下初始化目录(具体数据目录可以自定义)，使用初始化脚本进行初始化。 #实验2说明，数据库在编译的时候会修改源码里面的内容，例如src/mysql-5.6.24/support-files/mysql.server ,会将根目录修改为编译时指定的根目录 # 数据库编译时指定数据目录，安装完成后mysql工具没有指定数据目录且根目录下没有data目录会优先将编译时指定的数据目录作为自己的数据目录 #======= 点击(此处)折叠或打开 #======= #实验1 #======= [root@xxx mysqlrp]# mkdir /tmp/test #======= #测试进入临时目录，做数据目录初始化 #======= [root@xxx mysqlrp]# cd /tmp/test/ [root@xxx test]# /usr/local/mysqlrp/scripts/mysql_install_db --user=mysql & [1] 36700 [root@xxx test]# FATAL ERROR: Could not find ./bin/my_print_defaults If you compiled from source, you need to run 'make install' to copy the software into the correct location ready for operation. If you are using a binary release, you must either be at the top level of the extracted archive, or pass the --basedir option pointing to that location. [1]+ Exit 1 /usr/local/mysqlrp/scripts/mysql_install_db --user=mysql [root@xxx test]# /usr/local/mysqlrp/scripts/mysql_install_db --user=mysql --datadir=/data/mysql & [1] 36704 [root@xxx test]# FATAL ERROR: Could not find ./bin/my_print_defaults If you compiled from source, you need to run 'make install' to opy the software into the correct location ready for operation. If you are using a binary release, you must either be at the top level of the extracted archive, or pass the --basedir option pointing to that location. [1]+ Exit 1 /usr/local/mysqlrp/scripts/mysql_install_db --user=mysql --datadir=/data/mysql [root@xxx test]# /usr/local/mysqlrp/scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysqlrp --datadir=/data/mysql & #======= #指定了根目录后总算初始化成功 #======= [root@xxx mysqlrp]# cp support-files/mysql.server /etc/init.d/mysqld [root@xxx mysqlrp]# chown -R mysql.mysql /usr/local/mysql [root@xxx mysqlrp]# chown -R mysql.mysql /data/mysql/ [root@xxx mysqlrp]# mkdir log [root@xxx mysqlrp]# chown -R mysql.mysql log [root@xxx mysqlrp]# ./bin/mysqld_safe --user=mysql & [1] 37694 [root@xxx mysqlrp]# 151113 15:45:58 mysqld_safe Logging to '/data/mysql/zc-appname-ip-ip.err'. 151113 15:45:59 mysqld_safe Starting mysqld daemon with databases from /data/mysql 151113 15:45:59 mysqld_safe mysqld from pid file /data/mysql/zc-appname-ip-ip.pid ended [1]+ Done ./bin/mysqld_safe --user=mysql [root@xxx mysqlrp]# ps -ef|grep mysql root 37847 12729 0 15:46 pts/3 00:00:00 grep mysql #======= #试图启动，失败 #======= [root@xxx local]# mv mysqlrp/ mysql [root@xxx mysqlrp]# chown -R mysql.mysql /usr/local/mysql [root@xxx local]# mv mysql/ mysqlrp [root@xxx local]# service mysqld start Starting MySQL.The server quit without updating PID file (/data/mysql/zc-appname-ip-ip.pid). [FAILED] #======= #试图启动，失败 #======= [root@xxx local]# cd mysqlrp/ [root@xxx mysqlrp]# ./bin/mysqld mysqld mysqld_multi mysqld_safe mysqldump mysqldumpslow [root@xxx mysqlrp]# ./bin/mysqld_safe --user=mysql& [1] 38052 [root@xxx mysqlrp]# 151113 15:49:31 mysqld_safe Logging to '/data/mysql/zc-appname-ip-ip.err'. 151113 15:49:31 mysqld_safe Starting mysqld daemon with databases from /data/mysql 151113 15:49:32 mysqld_safe mysqld from pid file /data/mysql/zc-appname-ip-ip.pid ended [1]+ Done ./bin/mysqld_safe --user=mysql [root@xxx mysqlrp]# ps -ef|grep mysql root 38205 12729 0 15:49 pts/3 00:00:00 grep mysql #======= #试图启动，失败 #======= [root@xxx mysqlrp]# ./scripts/mysql_install_db --user=mysql --datadir=/data/mysql/ & #======= #初始化数据目录成功 #======= [root@xxx mysqlrp]# ./scripts/mysql_install_db --user=mysql --datadir=/usr/local/mysqlrp/data/ & #======= #再次初始化数据目录，成功 #======= [root@xxx mysqlrp]# ./bin/mysqld_safe --user=mysql & [1] 38312 [root@xxx mysqlrp]# 151113 15:56:03 mysqld_safe Logging to '/usr/local/mysqlrp/data/zc-appname-ip-ip.err'. 151113 15:56:03 mysqld_safe Starting mysqld daemon with databases from /usr/local/mysqlrp/data [root@xxx mysqlrp]# ps -ef|grep mysql root 38312 12729 0 15:56 pts/3 00:00:00 /bin/sh ./bin/mysqld_safe --user=mysql mysql 38441 38312 3 15:56 pts/3 00:00:00 /usr/local/mysqlrp/bin/mysqld --basedir=/usr/local/mysqlrp --datadir=/usr/local/mysqlrp/data --plugin-dir=/usr/local/mysqlrp/lib/plugin --user=mysql --log-error=/usr/local/mysqlrp/data/zc-appname-ip-ip.err --pid-file=/usr/local/mysqlrp/data/zc-appname-ip-ip.pid --socket=/tmp/mysql.sock root 38465 12729 0 15:56 pts/3 00:00:00 grep mysql #======= #试图启动，成功 #======= #======= #实验2 #======= [root@xxx mysqlrp]# 151113 15:56:43 mysqld_safe mysqld from pid file /usr/local/mysqlrp/data/zc-appname-ip-ip.pid ended ps PID TTY TIME CMD 12729 pts/3 00:00:00 bash 38471 pts/3 00:00:00 ps [1]+ Done ./bin/mysqld_safe --user=mysql [root@xxx mysqlrp]# ps -ef|grep mysql root 38473 12729 0 15:56 pts/3 00:00:00 grep mysql [root@xxx mysqlrp]# service mysqld start Starting MySQL.The server quit without updating PID file (/[FAILED]ql/zc-appname-ip-ip.pid). [root@xxx mysqlrp]# [root@xxx local]# cp src/mysql-5.6.24/support-files/mysql.server /etc/init.d/mysqldcp: overwrite `/etc/init.d/mysqld'? y [root@xxx local]# service mysqld start /etc/init.d/mysqld: line 256: my_print_defaults: command not found /etc/init.d/mysqld: line 276: cd: /usr/local/mysqlrp: No such file or directory Starting MySQLCouldn't find MySQL server (/usr/local/mysqlr[FAILED]sqld_safe) [root@xxx local]# mv mysql mysqlrp [root@xxx local]# service mysqld start Starting MySQL.The server quit without updating PID file (/[FAILED]ql/zc-appname-ip-ip.pid). [root@xxx local]# vi /etc/my.cnf datadir=xxxx [root@xxx local]# service mysqld start Starting MySQL. [ OK ] 到此，相信大家对“MySQL源码安装的方法介绍”有了更深的了解，不妨来实际操作一番吧！ （编辑：源码门户网） 【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容! |
站长推荐